SENS WSXAL

Page Loading...

SENS WSXAL WALL SWITCH SENSOR PASSIVE INFARED

Mouse over image to zoom, click to enlarge

DESCRIPTION
Wall Switch Sensor; Type Sensor with Relay; Sensor Type Passive Infrared; Voltage Rating 120 to 277 VAC at 50/60 Hz; Load Type LED/Electronic and Magnetic Ballast/Fluorescent/Incandescent/Motor; Load Rating 800 W at 120 VAC, 1200 W at 277 VAC (Incandescent/Fluorescent), 1/4 HP (Motor); Area Coverage 20 Ft (Small Motion), 36 Ft (Large Motion); Time Delay 30 Sec to 30 Min; Wall Plate Type Matching (Included); Finish Almond; Mounting 1-Gang Wall Switch Box; Size 1.68 Inch W x 1.63 Inch D x 2.74 Inch H; Application Indoor; Approval UL (Canada and US); Silicone Free; RoHS Compliant?; Lens Material Plastic; Operating Mode Auto-On (Default) or Vacancy; Mounting Height 30 to 48 Inch; Operating Temperature Rating 14 to 122 Deg F; Humidity 20 to 75 Percent Non-Condensing
Lithonia Lighting  /  WSXAL

Wall Switch Sensor

SE Part Number: 2893317

SE Part Name:  SENS WSXAL WALL SWITCH SENSOR PASSIVE INFARED

UPC:  82047616778

Part Number: WSXAL

UNSPSC: 39122200

Status:  STOCK

Your Price:  $56.88 / ea
 
Qty  eaAdd to Cart View Cart Checkout

INVENTORY / AVAILABILITY

Total Availabile: 16 ea

Availability By Branch

  • Springfield, ILB/O or Special Order
  • Bloomington, IL3 ea
  • Champaign, IL2 ea
  • East Peoria, IL5 ea
  • Danville, ILB/O or Special Order
  • Mt. Vernon, ILB/O or Special Order
  • Mattoon, ILB/O or Special Order
  • Peru, ILB/O or Special Order
  • Rockford, ILB/O or Special Order
  • Decatur, ILB/O or Special Order
  • Moline, IL4 ea
  • Carbondale, ILB/O or Special Order
  • Davenport, IA2 ea
  • Edwardsville, ILB/O or Special Order
  • CorporateB/O or Special Order
  • Quincy, ILB/O or Special Order
  • Hannibal, MOB/O or Special Order
  • Evansville, INB/O or Special Order
  • Vincennes, INB/O or Special Order
  • Terre Haute, INB/O or Special Order

Additional Information

  • Humidity 20 to 75 Percent Non-Condensing
  • Operating Temperature Rating 14 to 122 Deg F
  • Mounting Height 30 to 48 Inch
  • Operating Mode Auto-On (Default) or Vacancy
  • Lens Material Plastic
  • RoHS Compliant?
  • Silicone Free
  • RoHS Compliant
  • Silicone Free
  • Integrated Photocell (Disabled by Default) Prevents Light from Turning on If Sufficient Daylight is Present
  • Vandal Resistant Lens
  • Line Power and Load Wires are Interchangeable Impossible to Wire Backwards
  • Fully Meets NEC 2011 Section 404.2C Neutral Requirements No Current Leakage to Ground When Connected to Neutral
  • Ultra Low Current Leakage When Connected Via Ground
  • Device Accommodates Powering Over Ground or Neutral Connection
  • Self-Grounding Mounting Strap
  • Pushbutton Programmable without Removing Cover Plate Adjustable Time Delays and Operating Modes
  • Small Motion Detection to 20 Ft
  • 100 Percent Passive Detection, No Potential for Interference with Other Building Systems
  • Programmable with Sensor Switch VLP App or Traditional Pushbutton, Refer to Ordering Information for Availability
  • UNSPCS: 41111961
  • Approval: UL (Canada and US)
  • Application: Indoor
  • Size: 1.68 Inch W x 1.63 Inch D x 2.74 Inch H
  • Mounting: 1-Gang Wall Switch Box
  • Finish: Almond
  • Wall Plate Type: Matching (Included)
  • Time Delay: 30 Sec to 30 Min
  • Area Coverage: 20 Ft (Small Motion), 36 Ft (Large Motion)
  • Load Rating: 800 W at 120 VAC, 1200 W at 277 VAC (Incandescent/Fluorescent), 1/4 HP (Motor)
  • Load Type: LED/Electronic and Magnetic Ballast/Fluorescent/Incandescent/Motor
  • Voltage Rating: 120 to 277 VAC at 50/60 Hz
  • Sensor Type: Passive Infrared
  • Type: Sensor with Relay
 
 
Time Zone 
 

Alternative Product Disclaimer

The online Cross-Reference Information presented on Springfield Electric's Website is proprietary and provided as a tool to determine potential equivalent catalog numbers. Catalog numbers of other manufacturers are shown for products that appear to be equivalent in their functional use, though not necessarily interchangeable. Product replacements/cross-reference may not be exact one-for-one match. They may not be equivalent as to form-fit-function requirements and may require a system replacement . Springfield Electric and the manufacturers recommend review of manufacturers' product literature, associated documentation of product details and verification of the information necessary to make the appropriate product selecting for a given application.