Image thumbnail 0
Image thumbnail 1

Email

SQD LC1D95M7 IEC contactor, TeSys D

Manufacturer: Square-D / Schneider | Catalog # LC1D95M7 | Springfield Electric Part # 185184

$613.41/ea
ea
Log in or register to view your price, purchase history, and more!
Usually ships within 8 to 12 days
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Technical Information

Applications
Motor control;Resistive load
Coil Voltage
220 V AC 50/60 HZ,220 V AC STANDARD,POWER CIRCUIT <= 300 V DC 25...400 HZ-POWER CIRCUIT <= 1000 V AC
Contact Configuration
1 NC,1 NO,3 NO
Contact Rating
10 A 60 AC SIGNALLING CIRCUIT-125 A 60 AC POWER CIRCUIT
Impedance
125 A
Net Weight
1.61 kg
Operating Cycles
3600 cyc/h 60 C
Operating Temperature
-40-70 Adegrees C AT UC,-5-60 Adegrees C
Range
TeSys
Size
127 MM,130 MM,85 MM
Standard
CSA C22.2 No 60947-4-1,CSA C22.2 No 60947-5-1,EN/IEC 60947-1,EN/IEC 60947-4-1,EN/IEC 60947-5-1,GB/T 14048.4,UL 60947-4-1,UL 60947-5-1
Storage Temperature
-60-80 degrees C
TC Connection
CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-2.5 MMAFLEXIBLE WITH CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-2.5 MMAFLEXIBLE WITH CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-4 MMAFLEXIBLE WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-4 MMAFLEXIBLE WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 1 1-4 MMASOLID WITHOUT CABLE END-CONTROL CIRCUIT SCREW CLAMP TERMINALS 2 1-4 MMASOLID WITHOUT CABLE END-POWER CIRCUIT CONNECTOR 1 4-50 MMAFLEXIBLE WITHOUT CABLE END-POWER CIRCUIT CONNECTOR 2 4-25 MMAFLEXIBLE WITHOUT CABLE END-POWER CIRCUIT CONNECTOR 1 4-50 MMAFLEXIBLE WITH CABLE END-POWER CIRCUIT CONNECTOR 2 4-16 MMAFLEXIBLE WITH CABLE END-POWER CIRCUIT CONNECTOR 1 4-50 MMASOLID WITHOUT CABLE END-POWER CIRCUIT CONNECTOR 2 4-25 MMASOLID WITHOUT CABLE END
Type
Contactor
Voltage
1000 Volt
Wattage
12.5 Watt AC-1 - 7.2 Watt AC-3

Manufacturer Information

Brand
Schneider Electric
Sub Brand
TeSys D

General Product Info

GTiN
03389110451634
Product UPC
78590153619
Weight
3.55 lb

Dimensions

Depth
130 mm
Height
127 mm
Warranty Length
18 mth
Width
85 mm

Certifications and Compliance

CA Prop65 Warning
WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Certifications
BV,CCC,CSA,DNV-GL,EAC,IECEE CB Scheme,LROS (Lloyds Register Of Shipping),RINA,UL
Country of Origin
Czech Republic